This alloy replacement is CNC machined from a single billet to ensure a perfect fit without distortion or leakage and along with the supplied steel blanking plate, allows for the removal and replacement of the EGR valve on the T5 5 cylinder 2.5 engine.
The removal of the EGR valve, even those which are working perfectly, will give an increase in power, but most of the EGR valves after a period of time, compounded by those vehicles used on short journeys, will partially block and lead to power loss and poor running if they are not cleaned or replaced. Please be aware the engine management light will come on and the glow plug light will flash. This really is a worthwhile modification. If in the UK we have a trusted company who can do this for you.
Phone : 01282 851025
Email : Sales@pendleperformance.com
Web : www.pendleperformance.com
PLEASE NOTE THIS WILL ONLY FIT TO ENGINE CODES BNZ AND BPC
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.