This hose kit has been designed to allow the vehicle owner to modify or colour code the visible chargecooler hoses consisting of 2x Boost hoses (3 included in kit dependant on engine model) and 2x coolant hoses. The kit replaces the hoses shown below:
These hoses have been carefully replicated to produce a product that exceeds the OEM specification (Silicone does not break down over time compared with rubber based products).The hose kit comes with all of the hose clamps necessary to complete the installation.
In this 5 hose kit you will only require 4 out of the 5 hoses, this is dependant on your engine model. Below we have detailed which hoses will fit which engine type:
- T6 -180PS kit uses Hoses #1883, #1884, #1885 & #1906
- T6 - 204PS kit uses Hoses #1883,#1884, #1885 & #1886
Available in a range of colours, simply choice between red,blue, or black using the drop down menu.
- Suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) but more importantly for this application, air containing oil mist.
- The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
- The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader.
- Lifetime warranty*
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.