Forge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 (DAZA Engine Codes) as well as BMW's with part number 13627843531
The adaptor in this kit is machined from solid billet and offers two additional ports. One port including pipe fitting can be used for a dump valve or boost gauge to be fitted, the second port will accept a 1/8” NPT fitting which can be used for water meth.
Two plugs are included allowing one or both ports to be blanked off at any time. No modifications are required to OE parts making the install fully reversible. Hardware, including fitting instructions are supplied.
In the Box:
Boost tap adapter
Thank goodness that has Forge to manufacture a specific product for my car, otherwise could not put the measuring instruments. Material of great quality, fit perfectly, very well done and even better than the original. Perfect
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.