A simple way to tap into your manifold on the N14 and N18 engine found in the Mini Cooper S Turbo, Citroen DS3 1.6 Turbo, Peugeot 207 GTi, Peugeot 208 GTi and Peugeot RCZ THP156 and THP200. This adaptor utilises the (MAP) pressure sensor on the inlet manifold under the airbox.
Simply remove the existing sensor, fit our adaptor and refit the original sensor into our adaptor. You will then have a vacuum / boost connection suitable for 4mm tube or similar that can be used to install a boost gauge
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Boost Gauge Adaptor for Peugeot, MINI, Citroen and Renault
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
Blow Off Valve for Ford Focus RS MK3 & Vauxhall Adam, Astra, Corsa, and more
Manufacturer: Forge Motorsport