This piston operated blow off valve for the Ford Focus RS mk2 is not only the perfect replacement for the OEM valve, which is prone to failure when the engine has been tuned or had an upgrade to the engine management software, but also gives you the incredible sound as you lift off the throttle. The valve is supplied complete with all hoses clamps and tubing to ensure the best possible fit.
The silicone hose used can be supplied in a range of colours selectable in the options above.
In The Box:
1 x FMDVFRS2 Valve
1 x 1500mm of 4mm Vacuum Tube
3 x Cable Ties
1 x Silicon Hose #857
1 x 5mm Brass or Plastic T Piece
1 x 35mm Hose Clamp
2 x 40mm Hose Clamp
1 x Instructions
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email email@example.com.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.