Using components from our highly successful and ever popular Civic FK2 Atmospheric Dump Valve Kit, the development engineers at Forge have redeveloped the kit to fit the repackaged 4-cylinder K20 2.0 Turbo engine in the Honda FK8 Civic Type R.
This installation requires the removal of the OEM DV. It is our recommendation that the OEM valve is removed and replaced with the blanking plate supplied in this kit.
Developed and machined by Forge engineers in our UK CNC machine shop, the valve features our unique robust twin piston design, which allows for fine-tuning with interchangeable springs.
The Forge silicone hose in this kit has been designed to not only incorporate the valve but also smooth the airflow.
The construction of the hose has been engineered to exceed that of the OEM fitment and will enhance any engine bay both technically and aesthetically with the choice of black hose.
Covered by our industry leading Lifetime warranty.
This product comes assembled with a yellow spring. If you wish to further tune this product to fit the needs of your engine, please see the spring tuning kit below.
In the Box:
1 x FMDV19 Valve
1 x Custom Silicone Hose
1 x 2m of 4mm Silicone Hose
1 x 150mm of 5mm Silicone Hose
1 x Blanking Plate
1 x Plastic Hose Coupler
1 x Brass Hose T-piece
3 x Stainless Steel Hose Clamps
12 x Zip Ties
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.