An Alloy and Silicone replacement boost pipe kit for the Megane 225 / 230. The silicone couplers are available in a choice of red, blue or black.
Please note: In order to install this kit you will also require the hose with a "T" piece connection ( FMRMBHT ) if you have a blow off valve connection ( as shown in the image below ) or, if you do not have a blow off valve, you will need a straight hose.( FMRMBHS). These items must be ordered in addition to this kit. Please see the related items below. We are selling this kit in this way as many owners already have the Blow off valve hose if they have a valve installed, or already have the straight hose if they have fitted a boost hose kit.
In this hard pipe kit, the hoses and associated pipework are of 51mm diameter. This gives a big improvement on the restrictive 43mm standard pipes, which in places are quite restrictive.
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.