Please include Year, Make, Model, and Management system you are interested in.
When the first Volkswagens came to market, they were produced as a vehicle for the masses—simple, affordable, and economical to own. Fast-forward some 80-odd years and they have become highly sophisticated, technically advanced machines. As great as the new VW’s are, that does not stop us from wanting to make them even better! And by “better,” we mean “slammed on the ground.”
For starters, we added our smooth-riding, double-bellows air spring to a threaded body monotube strut. 30 levels of damping adjustment allow you go from race car stiff to a comfortable ride with the twist of a knob. Top all that off with a T6061 aluminum adjustable camber plate covered in a sexy red hue. All this equates to performance handling, killer ride quality and the ability to slam the front end 4.8” from stock.
The rear suspension was treated to a double-bellows air spring in the place of the factory coil spring, giving you a 5.8” drop from original stock height. To help keep things under control, we have added monotube shocks with 30 levels of damping adjustability to match the front—for the ultimate in handling and ride comfort!
NOTE: In front, you need to make sure that the diameter of the bottom of the strut, where it gets clamped by the knuckle, is 55mm in diameter. If this measures out to 50mm, then you need to order part number 78548.
Detailed instructions will help you get your VW MK7 slammed within a few short hours. If you have the ability to wire a stereo or swap out suspension parts, then you should have no problem installing this kit. However, to get maximum drop from the front suspension, frame modifications will need to be made by a competent fabricator. If you do run into a snag with the installation, our Air Lift Performance customer support team is top-notch, and can walk you through any questions you might have.
In order to bring to market the most durable air suspension possible, Air Lift Performance tortured the components of this kit to one million cycles (equivalent to approximately 100,000 miles) on their hydraulic test rig at temperatures from -30 deg F to 150 deg F. Couple this test lab work with thousands of miles of on-road testing—not to mention the one-year manufacturer’s warranty—and this is a kit you can count on to handle whatever the road throws down!
Isn’t it time you had the option of getting a killer lowered look without giving up ride quality or handling and having to worry about scraping your ride? Ditch the springs and get to an entire new level of low.
*Description is Generic for posting purposes*
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
All Forge Motorsport products come with a limited lifetime warranty. All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email firstname.lastname@example.org.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.