An atmospheric Dump or Blow Off valve for the Fiat 500 Abarth T-Jet. This kit is complete with all fittings and includes a replacement solenoid to activate the valve to retain the engine management functionality. The valve itself is of piston design for longevity with the ability to be tuned with replacement springs if required. (See below)
Please note: this product will NOT fit the 2012-on Abarth Multiair engine.
In The Box:
1 x FMDVF500 Valve
1 x Solenoid, 35mm Welded Hose Clamp with Bracket, and Screws
1 x 2000mm of 4mm Vacuum Tube
1 x Wiring Harness
10 x Cable Ties
2 x 35mm Hose Clamps
1 x Vacuum Tap
1 x M5 x 35 Self Tapper Screw
1 x 28mm Long Body Side Pipe
1 x Silicon Straight Hose (25mm x 65mm)
1 x 25mm Blanking Plug
1 x Instructions
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
Please Note: In line with our policy to constantly review ,revise and improve our product range, the product you receive may differ from the one advertised.
Write review here...
ShippingThe shipping cost will vary based on your location and your order.
Please check the tick box if you wish to be notified if the shipping cost is over $15.00
If under $15 or if you fail to select the option, to be notified, your order will automatically ship.